Tianqi 72-Y
Tianqi 72-Y CELL Lighting Tester, with full-scenario intelligent testing as its core, delivers innovative solutions for the CELL-stage lighting inspection field:
Omni-capability Signal Core
Intelligent collaborative ecosystem
End-to-End Quality Assurance
Integrating 72 signal channels, each with freely configurable waveform output (up to 256-order precision), this system meets diverse CELL lighting test requirements while enabling high-efficiency signal output and multi-type display module testing.
Through the integrated design of ARM and FPGA, efficient signal processing and free waveform configuration are achieved, supporting "one click" automated testing and customized test case creation.
From electrical performance validation to signal integrity analysis, from waveform configuration to rapid anomaly localization, this solution provides a one-stop service for CELL-stage lighting—encompassing R&D verification, production support, and fault diagnosis.
灰阶
彩条
放射
放射
Product Function Description |
BACK
· The number of signal output channels can reach 120CH:
· The number of signal output channels can reach 120CH:
·Signal channel output range: -30V to +30V
· Product protection function:：
· The device has multiple expansion device interfaces：
· Upper computer function-------User management：
·The product supports backlight output function：
·Upper computer function-------支持波形预览：
· USB Project File Import Function
·Upper computer function-------阻抗检测编辑功能：
All channels feature short-circuit protection. When an output channel encounters an external short-circuit condition, the device immediately activates hardware protection measures and terminates both signal and power output, significantly reducing equipment abnormalities caused by external human factors.
The signal interfaces are equipped with ESD protection, with each signal channel supporting 15kV air discharge and 8kV contact discharge capabilities.
This device has a maximum output current of 200mA and can drive multiple LCD cells simultaneously, with the specific quantity depending on the cell size.
The device supports screen testing operations through a Windows-based GUI host computer, and can also perform backlight testing via the Control Box. The Control Box features functions such as VCOM fine-tuning, model and workstation selection, as well as manual and automatic cycling backlight testing.
The device can output 120 signal channels, each without clock or data, and can be freely edited on the upper computer interface. The data of each channel can be freely copied, making engineering file editing convenient and fast.
120CH signal channel, output voltage range of -30V~+30V, larger voltage output range, can drive CELL lighting test.
The equipment supports the impedance detection box connection function and is compatible with various I/O devices for lamp control of PG (Programmable Gate). It also supports integration with AOI (Automated Optical Inspection) and other equipment.
软件提供管理员和作业员两种模式。管理员可进行设备升级、工程文件编辑和点灯测试等操作；作业员仅支持工程文件切换和点灯测试，无权修改文件。外接控制盒支持模组导入、工站选择和Vcom微调功能。
The host computer software is designed with a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial time in project file editing.
The device has a built-in 16G SD card, which can locally store up to 100 project files. Project files can be imported via a host computer or an external USB drive.
上位机基于 Windows 图像界面设计，支持单阶或多阶波形实时预览及输出，大大防止波形编辑错误，节省大量工程文件编辑时间。
The device supports a 30V constant voltage backlight output function and supports the expansion of a 50V 800mA constant current board (optional). Each image supports different voltage settings and can be freely edited.
16G
Output voltage order
Support device interaction
Communication support
Support independent output
Brightness test
满足CELL段大中小尺寸
Support real-time adjustment
Signal output
≤ 256 orders
Aging
AOI
120 channels
2%
Panel lighting
Voltage
High-precision
30V
Product Function Description |
BACK
· The number of signal output channels can reach 120CH:
· The number of signal output channels can reach 120CH:
·Signal channel output range: -30V to +30V
· Product protection function:：
· The device has multiple expansion device interfaces：
· Upper computer function-------User management：
·The product supports backlight output function：
·Upper computer function-------Supports waveform preview.：
· USB Project File Import Function
·Upper computer function-------Impedance editing function：
All channels feature short-circuit protection. When an output channel encounters an external short-circuit condition, the device immediately activates hardware protection measures and terminates both signal and power output, significantly reducing equipment abnormalities caused by external human factors.
The signal interfaces are equipped with ESD protection, with each signal channel supporting 15kV air discharge and 8kV contact discharge capabilities.
This device has a maximum output current of 200mA and can drive multiple LCD cells simultaneously, with the specific quantity depending on the cell size.
The device supports screen testing operations through a Windows-based GUI host computer, and can also perform backlight testing via the Control Box. The Control Box features functions such as VCOM fine-tuning, model and workstation selection, as well as manual and automatic cycling backlight testing.
The device can output 120 signal channels, each without clock or data, and can be freely edited on the upper computer interface. The data of each channel can be freely copied, making engineering file editing convenient and fast.
120CH signal channel, output voltage range of -30V~+30V, larger voltage output range, can drive CELL lighting test.
The equipment supports the impedance detection box connection function and is compatible with various I/O devices for lamp control of PG (Programmable Gate). It also supports integration with AOI (Automated Optical Inspection) and other equipment.
软件提供管理员和作业员两种模式。管理员可进行设备升级、工程文件编辑和点灯测试等操作；作业员仅支持工程文件切换和点灯测试，无权修改文件。外接控制盒支持模组导入、工站选择和Vcom微调功能。
The host computer software is designed with a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial time in project file editing.
The device has a built-in 16G SD card, which can locally store up to 100 project files. Project files can be imported via a host computer or an external USB drive.
The host PC software features a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial engineering file editing time.
The device supports a 30V constant voltage backlight output function and supports the expansion of a 50V 800mA constant current board (optional). Each image supports different voltage settings and can be freely edited.
16G
Output voltage order
Support device interaction
Communication support
Support independent output
Brightness test
· Multi-cell Backlight Testing and Multi-mode Operation Control：
满足CELL段大中小尺寸
Support real-time adjustment
Signal output
≤ 256 orders
Aging
AOI
120 channels
2%
Panel lighting
Voltage
High-precision
30V
Product Function Description |
BACK
· The number of signal output channels can reach 120CH:
· Multi-cell Backlight Testing and Multi-mode Operation Control：
·Signal channel output range: -30V to +30V
· Product protection function:：
· The device has multiple expansion device interfaces：
· Upper computer function-------User management：
· Upper computer function-------User management：
· The product supports backlight output function：
· USB Project File Import Function
All channels feature short-circuit protection. When an output channel encounters an external short-circuit condition, the device immediately activates hardware protection measures and terminates both signal and power output, significantly reducing equipment abnormalities caused by external human factors.
The signal interfaces are equipped with ESD protection, with each signal channel supporting 15kV air discharge and 8kV contact discharge capabilities.
This device has a maximum output current of 200mA and can drive multiple LCD cells simultaneously, with the specific quantity depending on the cell size.
The device supports screen testing operations through a Windows-based GUI host computer, and can also perform backlight testing via the Control Box. The Control Box features functions such as VCOM fine-tuning, model and workstation selection, as well as manual and automatic cycling backlight testing.
The device can output 120 signal channels, each without clock or data, and can be freely edited on the upper computer interface. The data of each channel can be freely copied, making engineering file editing convenient and fast.
120CH signal channel, output voltage range of -30V~+30V, larger voltage output range, can drive CELL lighting test.
The equipment supports the impedance detection box connection function and is compatible with various I/O devices for lamp control of PG (Programmable Gate). It also supports integration with AOI (Automated Optical Inspection) and other equipment.
The software provides two modes: administrator and operator. Administrators can perform operations such as device upgrades, engineering file editing, and lighting tests; The operator only supports engineering file switching and lighting testing, and has no authority to modify files. The external control box supports module import, workstation selection, and VSP fine-tuning functions.
The host computer software is designed with a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial time in project file editing.
The device has a built-in 16G SD card, which can locally store up to 100 project files. Project files can be imported via a host computer or an external USB drive.
上位机基于 Windows 图像界面设计，支持单阶或多阶波形实时预览及输出，大大防止波形编辑错误，节省大量工程文件编辑时间。
The device supports a 30V constant voltage backlight output function and is expandable with an optional 50V 800mA constant current board. Each display frame can be configured with different voltage settings, allowing for flexible editing.
16G
Output voltage order
Support device interaction
Communication support
Support independent output
Brightness test
满足CELL段大中小尺寸
Support real-time adjustment
Signal output
≤ 256 orders
Aging
AOI
120 channels
2%
Panel lighting
Voltage
High-precision
30V
Product Function Description |
BACK
· The number of signal output channels can reach 72CH:
· Multi-cell Backlight Testing and Multi-mode Operation Control：
·Signal channel output range: -40V to +40V
· Product protection function：
· The device has multiple expansion device interfaces：
· Upper computer function-------User management：
· The product supports backlight output function：
· Upper computer function-------Supports waveform preview：
· USB Project File Import Function：
· Upper computer function-------Impedance editing function：
All channels feature short-circuit protection. When an output channel encounters an external short-circuit condition, the device immediately activates hardware protection measures and terminates both signal and power output, significantly reducing equipment abnormalities caused by external human factors.
The signal interfaces are equipped with ESD protection, with each signal channel supporting 15kV air discharge and 8kV contact discharge capabilities.
The maximum output current of this device is 1000mA, and it can simultaneously drive 1-4 LCD cells, depending on the cell size. The device supports screen tapping operations through the upper computer of the Window graphical interface, and can also perform lighting tests through the Control box. The Control box has functions such as VCOM fine-tuning, model and workstation selection, manual and automatic cycling lighting, etc.
The device can output 72 signal channels, each without clock or data, and can be freely edited on the upper computer interface. The data of each channel can be freely copied, making engineering file editing convenient and fast.
72CH signal channel, output voltage range of -40V~+40V, larger voltage output range, can drive CELL lighting test.
The equipment supports the impedance detection box connection function and is compatible with various I/O devices for lamp control of PG (Programmable Gate). It also supports integration with AOI (Automated Optical Inspection) and other equipment.
The software provides two modes: administrator and operator. Administrators can perform operations such as device upgrades, engineering file editing, and lighting tests; The operator only supports engineering file switching and lighting testing, and has no authority to modify files. The external control box supports module import, workstation selection, and VSP fine-tuning functions.
The host computer software is designed with a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial time in project file editing.
The device has a built-in 16G SD card, which can locally store up to 100 project files. Project files can be imported via a host computer or an external USB drive.
The host PC software features a Windows-based graphical interface, supporting real-time preview and output of single-stage or multi-stage waveforms. This significantly reduces waveform editing errors and saves substantial engineering file editing time.
The device supports a 30V constant voltage backlight output function and is expandable with an optional 50V 800mA constant current board. Each display frame can be configured with different voltage settings, allowing for flexible editing.
16G
Output voltage order
Support device interaction
Communication support
Support independent output
Brightness test
Compatible with small/medium/large-sized panels in the CELL stage
Support real-time adjustment
Signal output
≤ 256 orders
Aging
AOI
72 channels
2%
Panel lighting
Voltage
High-precision
30V
|
|
About Freesense
Company History
R&D and Manufacturing Base
Join Us
News Center
Contact Us
Contact Us CONTACT US
2D & 3D Optics
Battery Standard Testing
Electrical Signal Standard Testing
Product Center
Standard Software
Email: sale@freesense.com
Address: Building 9, No. 88 Jinhai Road, Pudong New Area, Shanghai, China
Tel: +86 21-62495999
Scan the QR Code to Follow Us